How To Avoid Stainless Steel Mesh Obstruction

In daily life and machine production, how to effectively avoid the obstruction of stainless steel mesh is a concern of many customers. When the nutrient in the filtering background is more than 5%, if there is no condition to dry the materials, dry the screen surface and screen hole of stainless steel mesh. When the nutrient is more than 8%, wet screening should be used. For materials with more flake particles, it is necessary to change the material crushing method and the particle size allocation of different crushing methods. For specific specifications, please refer to the specification table of stainless steel screen

Because most of the material particles to be screened are irregular, there are many reasons for obstruction. When the material particle size is fine, the mud content is high, and the screening particle size is small, the blocking effect of nutrients on the stainless steel mesh will have a voting effect. Stainless steel mesh is easy to cause obstruction of stainless steel mesh in the process of application. In summary, there are the following reasons

1. Spherical particles are also materials with multiple contact points for stainless steel mesh. Simply speaking, the congestion of stainless steel mesh is due to the large size of contact plane or object surface and many contact points;

2. The impurities of the filter material are congested and rich in many particles close to the mesh volume of the stainless steel mesh. A simple understanding is that the diameter and volume of the filtered things are almost the same as the mesh volume of the stainless steel mesh, so it is easy to jam the mesh;

3. Materials with fiber quality; More flake particles; Making stainless steel mesh;

4. For thick stainless steel mesh such as rubber stainless steel mesh, the hole shape plan is unreasonable and does not reach the upper small and lower large, which makes the particles stuck.